📄️ Cisco Meraki
In this section, there exists Cisco Meraki MR18 series configuration sample. It may differ depending on the firmware version. This document was created according to the Cisco Meraki MR18 device.
📄️ Cisco WLC
This section contains an example configuration for the Cisco Wireless Controller. After accessing the management panel, the necessary definitions must be made on the Cisco Wireless Controller. For detailed definitions, "External Web Authentication with Wireless LAN Controllers Configuration Example" document published by Cisco can be referenced.
📄️ Edge Core
This section contains the configuration example for Edge-Core Controller. This model of Edge-Core is used to manage the same brand of Access Points. Integration is also possible for stand-alone Access Point models. However, this document describes the necessary definitions on the Edge-Core Controller after Wirofy accesses the management panel for integration. For detailed definitions, EdgecoreEWSUserManual20180511.pdf can be referenced.
📄️ Engenius Ezmaster
EnGenius devices can be managed via ezMaster or Controller. In the Ezmaster or Engenius Controller management panel, "admin" must be entered in the default user name and "password" in the password. The screenshots in this document were taken through the Ezmaster system. There are similar interfaces on the Controller.
📄️ FortiGate FortiOS
This section contains an example configuration for Fortinet. It may differ according to the Fortinet framework version. This document was created according to Fortinet 200D Firmware v6.0.3 build0200 (GA).
📄️ Mikrotik RouterOS
This section contains an example configuration for Mikrotik. Mikrotik RouterOS can work on any running RouterBoard. It also contains configuration settings for models with wireless capability. In models without wireless feature, interface settings can be made for physical ports.
📄️ Ruckus ZoneDirector
In this section, there exists Ruckus ZoneDirector configuration sample. Screen shot and settings are explained on the Ruckus ZoneDirector 1100 model. It works with Zone Flex Access Point Modems. Necessary definitions must be made on Ruckus after logging in to the management panel. For detailed definitions, http://c541678.r78.cf2.rackcdn.com/appnotes/appnote-wispr.pdf link can be referenced.
📄️ Ruijie
This section contains an example configuration for Ruijie. The Ruijie Cloud and Standalone Access Point configuration has been tested. AP520 (W2) model and Firmware AP_RGOS 11.1 (5) B40P6, Release (06150511) were used as Access Points. External welcome page support can work as cloud and independent management.
📄️ SonicWall SonicOS
The screenshots and settings are explained via the "TZ 400 Wireless AC" model and the "SonicOS Enhanced 6.2.5.1-26n" Firmware Version. Necessary definitions must be made on Sonicwall after accessing the management panel.
📄️ Teltonika RUT9XX
In this section, there exists Teltonika RUT9XX series configuration sample. It may differ depending on the firmware version. This document was created according to the Teltonika RUT9XX device.
📄️ TP-Link EAP
In this section, there exists TP-Link EAP configuration sample. Tested with Omada Controller V3.1.4 and Firmware 1.1.0 Build 20190220 Rel.41433. EAP225 (EU) and Firmware 2.5.1 Build 20190307 Rel. 48992 were run as Access Point. External captive portal support can work as Controller and Standalone.
📄️ WatchGuard Fireware
In this section, there exists Watchguard configuration sample. Watchguard provides configuration from both Web UI and Windows Application. This document will explain the details on Fireware Web UI. If you want to use Policy Manager please follow the link
📄️ ZyXel UAG
In this section, there exists Zyxel UAG series configuration sample. It may differ depending on the firmware version. This document was created according to the Zyxel UAG4100 device.